Power wheels, the popular battery-powered ride-on cars for kids, bring joy and adventure to young drivers across the world. However, like any toy powered by electricity, they can sometimes require maintenance due to wear and tear or overuse. Understanding when and how to replace a Power Wheels motor (which is generally the same motor found in power tools) is crucial for maintaining the toy’s functionality and ensuring the safety of its young riders.

This article will guide you through the process of identifying when a motor might need replacement and provides a step-by-step guide to make the replacement process smooth and easy. Whether you’re a DIY expert or a first-time ride on car owner, this guide aims to equip you with the knowledge needed to tackle a motor replacement confidently.

What’s in this guide

Key Takeaways
Part One

Signs That your Power Wheels Motor Needs to Be Replaced

Identifying when the motor of your Power Wheels needs replacement is crucial for ensuring both performance and safety. Here are some common things to watch out for:

  • Reduced Speed and Performance: If your kids ride on car is moving slower than usual or struggling to climb slopes it once handled easily, it could indicate a reduction in motor performance.
  • Strange Noises: Unusual sounds like grinding or whirring from the motor area can often be a sign of issues.
Kids Pink Bumper Car
Ride-On Police Car
  • Intermittent Operation: If your Power Wheels starts and stops unpredictably or fails to start at all, the motor could be at fault.
  • Burning Smells: A distinct burning odour near the motor area can signify electrical issues or motor damage.
  • Physical Damage: Visible signs of damage like corrosion, frayed wires, or physical impact to the motor also indicate a need for replacement.

Proactively addressing these signs can prevent further damage and keep your kids ride on car running smoothly and safely.

Part Two

Tools and Materials Needed to Replace your Power Wheels Motor

To successfully replace your Power Wheels motor, it’s important to have the right tools and materials. Here’s a list of what you’ll need:

  • Replacement Motor: Ensure it’s compatible with your Power Wheels model.
  • Screwdriver Set: For opening the toy’s body and accessing the motor.
  • A Spanner: To loosen and tighten nuts and bolts.
Ride-On Range Rover Velar
Ride On Aeroplane Toy
  • Multimeter: For testing electrical connections and motor functionality.
  • Protective Gear: Safety glasses and gloves for personal protection.
  • Cable Ties and Electrical Tape: For securing wires and connections.

Having these tools and materials ready before starting the replacement process will make the job easier.

Part Three

Step-by-Step Guide to Replacing your Power Wheels Motor

  • Safety first: Disconnect the battery completely to ensure no electricity is flowing to the motor, removing the risk of an electrical shock.
  • Unplug the motor: Some models vary, but generally speaking, a kids ride on car has two motors which are located just behind the two rear wheels. Trace the wire that leads from the motor you are replacing into the main motherboard under the seat and unplug it. Remember the path the wires flowed through, so that you can follow this path when connecting the new motor.
  • Access the motor: Remove the rear wheel that the motor you are replacing sits behind. Once the wheel has been removed, you should be able to slide out the unit that holds the motor.
  • Remove the old motor: Use a spanner or screwdriver to remove bolts or screws securing the old motor in place. Gently remove the motor from its mount.
Kids Ride On Car Motor
Pink Ride-On Range Rover Velar
  • How to test power wheels motor replacement: To test a Power Wheels motor replacement, reconnect the battery and check the vehicle’s operational functionality such as speed and acceleration.
  • Reassembly: Once satisfied, re-attach the wheel and seat (depending on where the motor is located).
  • Final check: Do a final safety and performance check to ensure everything is working as expected.

Remember, precision and careful attention to detail are key for a successful motor replacement.

Conclusion

In conclusion, replacing the motor on a Power Wheels toy is a manageable task that can significantly enhance your kids ride-on toy experience. By identifying the signs of a failing motor, gathering the necessary tools and materials, and following our step-by-step guide, you can ensure a successful replacement.

Regular maintenance and attention to any issues not only prolong the life of your kids ride on car but also ensure the safety and enjoyment of its young riders. Remember, taking the time to properly care for and repair Power Wheels can lead to countless hours of joyful play for your kids.

About the Author

Hannah

Hannah Hill

Entrepreneur, and mother of three. Hannah is a toy expert with 20+ years in the online toy industry, founding the Kidaroos website that sells 10,000+ toys per year. Hannah is always looking for new, innovative ways to keep everyone's kids active and energised in a world full of screens and social media and has been featured in publications such as Authority Magazine.

More Useful Guides